Pro Clima Windtight and Airtight Tapes
We stock a range of pro clima tapes, these are easy to install and are simple solutions to ensuring your project is airtight and windtight. Whether your project is a block build or timber frame, there are systems to suit both options.
If you would like help on which tapes to use, give us a call on 01938 500 797.
TESCON VANA
Sizes Available
Length: 30m
Width: 60mm or 150mm
Features
TESCON VANA is used to form a secure and permanent seal of overlaps between foil and fleece membranes (Intelligent vapour checks and airtightness membranes, roof underlays and wall membranes) and joints between such membranes and smooth, non-mineral surfaces.
TESCON VANA is also suitable for sealing butt joints between wood-based panels such as OSB or MDF sub-roof panels or wood fibre softboards in combination with TESCON Primer.
Backing → Special fleece made from PP
Adhesive → Waterproof SOLID adhesive
Release paper → Siliconized paper
UV stability and outdoor exposure → 6 months
Application temperature → From – 10°C
Temperature resistance → From – 40°C to + 90°C
Storage cool and dry → cool and dry
Service Life → 100 years
Exterior: Windtight bonding of roof-mounted vapour control layers and refurbishment vapour retarders and airtightness membranes. Wind-proofing of sarking membranes, roof lining membranes and wall lining membranes (e.g. pro clima SOLITEX). Windproof bonding of wood-based panels used as sarking boards. All bonding, indoor and outdoor, can be between the same material as well as with adjacent structural components with a smooth, non-mineral surface (e.g. pipe penetrations, roof windows).
Airtight
Windtight
For interior use
For exterior use
TESCON PROFIL
Sizes Available
Length: 30m
Width: 60mm (48/12mm split)
Features
Suitable for sealing reveals at windows, doors, planed timber, corners and roof windows to the Intelligent airtight vapour check.
Ensures high protection against piercing in corners due to its high elasticity.
Backing→ Special PP fleece
Adhesive → Waterproof SOLID adhesive
Release film → Split silicone coated PE-film approx. 12mm and 48mm
Exposure time → 6 months
Application temperature → From – 10°C
Temperature resistance → Permanent – 40°C to + 90°C
Service Life → 60 years +
Airtight
Windtight
For interior use
For exterior use
CONTEGA SOLIDO SL
Sizes Available
Length: 30m
Width: 80mm, 100mm, 150mm or 200mm
Features
CONTEGA SOLIDO SL is bonded back to the existing block and can be easily plastered over the top of the fleece side.
Vapour retarding and airtight sealing of indoor window and door joints.
3 strip adhesive backing available in widths from 80, 100, 150 and 200mm.
Suitable for both pre and post window & door installation.
Backing → PP backing fleece, PP copolymer special membrane
Adhesive → Modified waterproof SOLID adhesive
Release film → One or two split silicone-coated PE sheet
sd-Value → 2.8m
Application temperature → From – 10°C
Temperature resistance → Permanent – 40°C to + 90°C
Airtight
Windtight
For interior use
CONTEGA SOLIDO EXO
Sizes Available
Length: 30m
Width: 80mm, 100mm, 150mm or 200mm
Features
Vapour permeable sealing of external window and door joints.
Can be plastered over the fleece side.
3 strip adhesive backing available in width from 80, 100, 150 and 200mm.
Suitable for both pre and post window & door installation.
Backing → PP backing fleece, PP copolymer special membrane
Adhesive → Modified waterproof SOLID adhesive
Release film → One or two split silicone-coated PE sheet
sd-Value → 0.7m
Application temperature → above – 10°C
Temperature resistance → Permanent – 40°C to + 90°C