We are registered with Elmhurst, the Independent Airtightness Testing Scheme, and have over 10 years’ experience carrying out air tightness tests.
Based in Welshpool, Mid Wales, we can test domestic and commercial buildings up to Passive House levels within the Powys, Shropshire, Cheshire and Herefordshire area.
What Our Customers Say
“
Prompt, efficient, friendly service.
Graham Kyle
“
Explains the technicalities, punctual and professional approach.
Roy Rylands
“
Efficient, quick and super service.
Sarah Sneyd
Get In Touch For An Air Test Quote
Let us know the size, location of the building and build type. If you have any plans please send us a copy, they are helpful but not essential.
What is an air tightness test?
An air tightness test assesses the building for ‘air permeability’ by measuring air leakage through unwanted gaps, cracks, and holes. All new buildings are now required to have an air tightness test, if you are renovating an old house it is also useful to carry one out to identify where the air leaks are so you can renovate your house more efficiently.
More air leakage = more heat loss = higher fuel demand.
More sizeable gaps in the fabric can lead to draughts and discomfort as well as potential health issues.
Why do I need an air tightness test?
All new buildings require an air tightness test as stated in the Building Regulations ADL1A (Dwellings) & L2A (Buildings other than dwellings) Conservation of Fuel and Power 2006. SAP (Standard Assessment Procedures) calcs also require an air test score to accurately calculate the buildings Energy Performance Certificate (EPC).
The lower the air test result, the better the EPC.
You can choose not to have an air test, but will be penalised by being given a default score of 15m³/(h.m²)@50 Pa – which is 50% higher than the worst acceptable Building Regulations standard.
What do I need to do before an air test?
The following needs to be completed before undertaking the test:
The building fabric complete
Water in all traps
Service penetrations made and sealed
Sockets fitted to the walls
Loft hatches fitted
All downlighters fitted and 240v power connected
How many tests will I need?
When testing to Building Regs standards, one test will be required.
When testing to Passive House Standards then 2 or 3 tests are required, see below for more details.
Testing to Passive House Standards
Only once the first test achieves the desired result (under 0.6ach@50Pa) can work continue and first fix begin, and the air tightness layer can be closed off.
Arrange this to be carried out once the air tightness layer is completely sealed, but still exposed.
During the test waste pipes, MVHR inlet and outlets will be sealed off.
Carried out after the first fix stage of the project.
To be carried out once the building is complete, certification is issued upon passing.
This test should really be a formality, as a great deal of attention will have been spent on ensuring the integrity of the air tightness layer throughout the duration of the build process.
Plan Ahead – design and specify for a high quality airtight build
Start thinking about the air tightness of your project at the early stages of design. Quality now will save time, money and improve thermal comfort.
“We have used quality pro clima membranes & tape systems on our timber framed developments for many years.”
Fitting Stage
The pro clima tapes and membranes should be fitted and applied to a high standard.
Seal all penetrations and holes when the airtight layer is still exposed, so that they are sealed for the long term, and not sealed badly using products that won’t remain airtight long term. Using the likes of expanding foam on site to close off unwanted holes highlighted during the test is bad practice.
View our range of pro clima products.
They have a range of BBA approved and Passive House Certified components.